SW-450 solid waste detector
SW-450 Bench spectrometer Solid Waste analyzer Mineral alloy composition analyzer
Introduction
For SW-450 in various fields of wide application, according to the optimization of product performance and improvement
Safety protection level needs, specially designed SW-450 solid waste detector.
Application of a new generation of high voltage power supplies and X-ray tubes to improve product reliability: Using new X-rays
The high power of the tube improves the testing efficiency of the instrument.
SW-450 Bench spectrometer Solid Waste analyzer Mineral alloy composition analyzer
Application field
1.Rapid detection of solid waste
2.Composition analysis of minerals and alloys (copper, stainless steel, etc.)
3.Metal coating thickness measurement, electroplating solution and coating content determination
4.Gold, platinum, silver and other precious metals and various jewelry content detection
5.Mainly used in solid waste industry, precious metal processing and jewelry processing industry: banks, jewelry sales and testing institutions; Electroplating industry
SW-450 Bench spectrometer Solid Waste analyzer Mineral alloy composition analyzer
Performance advantage
1.Under type: can meet the test requirements of various shapes of samples
2.Collimator and filter: A variety of collimator and filter electric switching, meet the application of various testing methods
3.Moving platform: fine manual moving platform, convenient location test point
4.High resolution detector: Improve the accuracy of analysis
5.New generation of high-voltage power supply and X-ray tube: stable and reliable performance, to achieve higher test efficiency
SW-450 Bench spectrometer Solid Waste analyzer Mineral alloy composition analyzer
Technical parameters
| Element analysis range | Phosphorus (P) ~ Uranium (U) | Detection limit | lppm |
| Analytical content | ppm~99.99% | Ambient temperature | 15°C to 30°C |
| Power supply | AC 220V soil 5V, AC purification and regulated power supply is recommended | Energy resolution | 144 V ±5e V |
| Sample cavity size | 439mm X 300mm X 50mm | Instrument size | 550mmX 41 0um X 320mm |
| Instrument weight | 45kg |
SW-450 Bench spectrometer Solid Waste analyzer Mineral alloy composition analyzer
Instrument configuration
Mobile sample platform
Signal-to-noise ratio intensifier
SDD detector
Signal detection electronic circuit
High and low voltage power supply
High power X-ray tube
Computers and inkjet printers
所有評(píng)論僅代表網(wǎng)友意見，與本站立場(chǎng)無關(guān)。