產品簡介
Your PROCON Pump is a precision-built piece of equipment. Handle it carefully. PROCON Pumps should be installed only by qualified technicians.
詳情介紹
| Page 23 Your PROCON Pump is a precision-built piece of equipment. Handle it carefully. PROCON Pumps should be installed only by qualified technicians. | NOTICE When you install your pump, follow these guidelines: - Do not hammer or mishandle your pump. - Keep all foreign materials out of your pump. - Never vise or grip the round body portion of the pump housing. Grip only the square inlet/outlet bosses when you install fittings. Always support the pump when you install fittings to avoid bending the V-clamp even if the pump is already mounted on the motor. - Make sure the power is off before working with an electric motor. If possible, lock out the power at a disconnect. - Make sure you have an adequate, well-lit work space and use the correct tools. - Do not use any components that are damaged or deformed. You should not have to force any parts together. If you receive parts that are damaged or deformed, call your PROCON factory representative. | We test every PROCON Pump at the factory for pressure and flow. If the pump has a relief valve, we set it to your specifications. | CAUTION Do not tamper with the relief valve on your pump. If you think the relief valve needs to be reset, contact your PROCON factory representative. | We make every effort to ensure your pump is of the highest quality. To get the most out of your pump, READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY. |
|
[ ] [ ] [ ] [ ] [ ]
[ ] [ ] [ ]
Copyright ?1999 - 2002 PROCON?Products. All rights reserved.
Revised: January 08, 2002. |
- 上一篇： 美國 procon 葉片泵
- 下一篇： 美國procon 3611高壓葉片泵
所有評論僅代表網友意見，與本站立場無關。