PROCON 103A100F31BA 250 are very reliable and long lasting under good conditions. The internal parts are made of graphite and need to run with more flow at the inlet than the pump flow rating. These pumps can not run dry or with insufficient supply without damaging them.
PROCON 103A100F31BA 250 can not run with particles or dirt more that 100 mesh or 150 microns (.006 mil.) in the water that it pumps with out damaging the graphite parts.
Our warranty does not cover:
PROCON 103A100F31BA 250 that have been opened or dismantled in any way PROCON 103A100F31BA 250 that ran dry or with insufficient water supply or cavitations Pumps that ran with an excessive pressure over 250 psi Pumps that ran under spinning conditions (relief valve of pump adjusted under the bypass valve pressure set, should be 50 psi over the bypass) Pumps that are used with other liquids than water Pumps that had debris in them
PROCON 103A100F31BA 250 Ask for a typical installation chart to help you obtain a long and reliable working pump. ML Parts will not be responsible for any damage or transport cost related to defective pumps.
所有評論僅代表網友意見，與本站立場無關。